German
French
Italian
Portuguese
Japanese
Korrean
Russian
What tools and materials are needed for daily maintenance of activated carbon adsorption cabinet?
What tools and materials are needed for daily maintenance of activated carbon adsorption cabinet?The tools and materials required for daily maintenance of the activated carbon adsorption cabinet can be divided into the following categories, which are specified as follows:1. Tools Dust collector Use: Clean up the residual activated carbon dust and debris in the cabinet to avoid blocking the pores. Recommended type: Household handheld vacuum cleaner or small industrial vacuum cleaner (depending on the size of the cabinet). Soft brush/brush Use: Gently wash the inner wall of the cabinet or hard-to-reach corners to remove fine dust. Wrench/Screwdriver Purpose: Remove cabinet doors or pipe interfaces to check tightness or replace parts. hygrograph Use: Monitor ambient temperature and humidity to avoid activated carbon failure due to high temperature and humidity. 2. Materials Activated carbon Specifications: Select the matching activated carbon (such as granular, or columnar) according to the equipment model, and pay attention to the iodine value and adsorption capacity parameters. Replacement amount: Refer to the filling amount of the equipment manual. Sealing strip Use: Replace aging or deformed cabinet door sealing rubber strips to ensure air tightness. Material: silicone or rubber material, high temperature, corrosion resistance. lubricant Application: Apply to the hinge or latch of the cabinet door to keep the switch smooth. Recommended type: Food-grade grease (to avoid contamination of the adsorption environment). Neutral cleaner Use: Clean the exterior stains of the cabinet, and avoid the use of acidic or alkaline detergent. Third, protective equipment Gloves Type: Rubber gloves or dust-resistant gloves to avoid direct contact with activated carbon dust. facemask Type: N95 or dust mask to prevent inhalation of fine carbon particles. goggles Use: Protect eyes during operation to avoid dust or debris splashing. 4. Other auxiliary materials Label stickers/pens Purpose: Mark the date of activated carbon replacement and record maintenance logs. Garbage bag Use: Collect waste-activated carbon (need to be sealed and treated according to environmental protection requirements). Drying box/oven Optional: Activated carbon for drying moisture (renewable type only, professional handling required). Matters needing attention Safe operation: Power off when replacing activated carbon to avoid fire caused by static electricity. Environmental protection treatment: If the waste-activated carbon has adsorbed toxic substances, it needs to be treated as hazardous waste. Professional tools: circuit or fan maintenance needs to use multimeters, insulation tools, etc., non-professionals do not disassemble themselves. Prepare tools and materials based on the preceding list to efficiently perform routine maintenance and ensure stable device performance. |
