German
French
Italian
Portuguese
Japanese
Korrean
Russian
What is the daily maintenance of high efficiency filter
What is the daily maintenance of high efficiency filterWith these high-quality features, high-efficiency filters are widely used on many occasions, precision electronic instrument factory occasions, to extend the service life high-efficiency filters should also do a good job of routine maintenance, the specific maintenance methods are as follows:1. Before installing the high-efficiency filter, it is not allowed to tear or open the packing bag or packing film by hand, and the air filter should be stored in strict accordance with the direction standard marked on the high-efficiency filter packing box; during the handling of the high-efficiency air filter, it should be lightly taken and put down, and violent vibration and collision should be avoided. 2. The transport and storage of high-efficiency filters should be set aside in the direction marked by the manufacturer. In the process of transport, it should be lightly held and put down to prevent violent vibration and collision, and not forced loading and unloading. 3. Before installing the high-efficiency filter, the packaging must be unpacked at the installation site for appearance inspection, which includes: whether there is any damage to the filter paper, sealant, and frame; whether the length, diagonal, and thickness dimensions are by the requirements; whether there is any burr and rust spot on the frame (metal frame); whether there is any product qualification certificate and whether the technical performance is by the design requirements. Then to the national standard "clean room construction and acceptance norms" [JGJ71-90] the prescribed method of inspection, qualified should be installed immediately. 4. For the high-efficiency filter, the installation direction must be correct: when the combined filter with the corrugated board is installed vertically, the corrugated board must be perpendicular to the ground; the connection between the filter in the vertical direction and the frame is strictly forbidden to leakage, deformation, breakage and leakage of glue, etc. The installation must ensure that the inner wall is clean and free of floating dust, grease, corrosion, and sundries. |
