German French Italian Portuguese Japanese Korrean Russian
Home

News

What factors are used to replace air filters?

What factors are used to replace air filters?

How often is the air filter of the air conditioning system changed? The high efficiency itself is made of fine glass fiber paper, and its filtration accuracy can filter more than 0.3um, which means that most of the dust in the atmosphere that can be seen and cannot be seen, including bacteria carriers, is filtered out before being sent to the clean room interior.



Whether it is used in air conditioning units or clean rooms, clean rooms, clean rooms, clean rooms, air supply at the end of the purification project, high-efficiency filters have a certain life span, how often to change high-efficiency air filters? In the end, under what circumstances should be replaced well?



Air conditioning system air filter has high filtration efficiency, large air volume, low resistance, and uniform wind speed, the use of partition design, with aluminum, wood, galvanized, and stainless steel as the outer frame, the use of fine glass filter paper as the filter media, glue board paper or aluminum foil as a separator, the corrugated partition can maintain the layer spacing, so that there is a partition high-efficiency air over the device in a small resistance, the maximum use of filter media.
When working, it can also capture 0.3μm particles.
In general, the high-efficiency filter is replaced once a year, but it depends on how long it takes to replace the medium-efficiency filter.



The cost of replacing air filters in the whole clean system is high, not only because of the high cost of acquisition, but also because of the need to stop and test the whole clean system when replacing the high-efficiency air filters, and the impact of stopping the operation is very big, so the high-efficiency air filters should not be replaced frequently, which requires the protection of high-efficiency air filters.



Over the years, the demand for high-efficiency air filters has become more and more widespread. They are mainly used to trap particles of dust below 0.5um and various suspended matters, as the end filtration of various filtration systems.
With high filtration power, low resistance, large dust capacity, and other characteristics, widely used in optical electronics, LCD LCD production, biological medicine, precision instruments, beverage food, PCB printing, and other occupations clean air purification workshop at the end of the air conditioning supply.