German
French
Italian
Portuguese
Japanese
Korrean
Russian
What are the safety precautions for the goods shower room of the fast-rolling shutter door?
What are the safety precautions for the goods shower room of the fast-rolling shutter door?There are many safety precautions in the use of the goods shower room, involving equipment operation, maintenance, and personnel safety, the following is the specific content:Equipment operation The correct use of induction device: it is necessary to understand the induction method of the cargo shower room, such as radar induction, photoelectric induction, etc., to avoid using objects to block the induction area for a long time, so as not to cause the door body to misoperate or cannot be closed normally. At the same time, when passing through the cargo shower, it is necessary to ensure that the personnel or goods pass through the induction area at a normal speed to prevent the opening and closing logic of the door from being affected by too fast or too slow passing. Follow the opening and closing operation specifications: In addition to the automatic induction of opening and closing, the cargo shower may also be equipped with manual buttons, remote control, and other operating methods. When using manual operation, follow the instructions of the sign and the manual, and do not press irrelevant buttons at will. When using the remote control, ensure that the remote control is used within the effective range to avoid misoperation. During the operation of the door body, do not forcibly push or block the door curtain, so as not to damage the door body or cause a safety accident. Pay attention to the operating status: During the operation of the cargo shower room, especially in the blowing stage, pay attention to the operating status of the door body and the blowing system. If it is found that the door is not running smoothly, there is abnormal noise, the blowing wind speed is abnormal, the time is not accurate, etc., should immediately stop using, it and notify professionals for inspection and maintenance. Equipment maintenance Regular inspection of door parts: regularly check the door curtain for damage, scratches, or aging phenomena, if found should be replaced in time. Check whether the door frame and track are deformed or loose and whether the screws are falling off. If there are problems, repair and tighten them in time. At the same time, ensure that the sealing rubber strip of the door body is intact to ensure a good sealing effect. Clean and maintain the induction device: clean the surface of the induction device regularly to prevent dust and dirt accumulation from affecting the induction sensitivity. For the photoinductive device, it is necessary to check whether the transmitting and receiving ends are aligned and adjust in time if there is a deviation. At the same time, according to the requirements of the equipment manual, the induction device is regularly maintained and calibrated to ensure its normal work. Maintenance of the shower system: Regularly clean the filter in the shower chamber to prevent the filter from blocking resulting in a decrease in the shower wind speed or air quality. Check the operating status of the fan to ensure its normal operation. If there is abnormal sound or vibration, check the cause of the fault in time. In addition, it is also necessary to check whether the blowpipe and nozzle are blocked and damaged, if there is a problem, it should be dredged or replaced in time. Personnel safety Prevent clamping: In the process of switching the door body of the cargo shower room, personnel and goods should maintain an appropriate distance to avoid being caught by the door curtain. Especially when many people or more goods pass through, pay attention to the interval between each other to prevent injuries caused by congestion. For children or persons with mobility difficulties, there must be a special escort through the cargo shower. Wear protective equipment: If equipment such as ultraviolet disinfection lamps are used in the cargo shower, personnel should avoid entering the cargo shower during disinfection operations to avoid UV damage. If you must enter, you should wear protective equipment such as protective glasses and protective clothing. At the same time, in the process of blowing, to prevent dust and other dust into the eyes and respiratory tract, personnel can wear protective glasses and masks. Emergency handling: Know the position of the emergency stop button in the cargo shower room and make sure it works properly. In case of an emergency, such as a door failure can not open or close normally, the shower system is abnormal, should immediately press the emergency stop button, and notify the relevant personnel to deal with it. After the emergency is lifted, the equipment should be fully inspected to confirm that there is no problem before resuming use. |
