German
French
Italian
Portuguese
Japanese
Korrean
Russian
What are the precautions for using high-temperature-resistant filters?
What are the precautions for using high-temperature-resistant filters?High-temperature filter, also known as a high-temperature air filter, is mainly used for a high-temperature clean oven or high-temperature drying room produced by tar, soot, dust particles, high-temperature sterilization equipment, and high-grade purification equipment.High-temperature resistant filters used in the organic silicone and inorganic glue curing process are cured from the surface to the inside, the thicker the height of the injection, the more difficult to cure, under normal circumstances, the glue curing time of 3-7 days, of course, in the use of the process, some precautions need to be observed. If the work intensity is relatively large, to extend the service life and reduce the workload when using, you can increase the pre-filtration environment. And different high-temperature resistant filters, the upper limit of the temperature that can be withstood by itself is also limited, and it is necessary to pay attention to the upper limit, and the temperature can not exceed the upper limit, otherwise it will also lead to damage to its quality. Sharp temperature rise and fall will affect the quality of the equipment to a certain extent. It is recommended to first understand its use specifications, and then by the use specifications, the start-up and shutdown process can do a good job in the gradual warming and gradual cooling, so that the start-up and shutdown work can be carried out by the normal process, to avoid the phenomenon of being damaged due to improper operation. Some of the precautions and other filters are similar, in addition to individual special material filters being different, we must pay attention to the protection of filters to extend their service life. The equipment does not have high requirements for the use of the environment, the temperature control within 240 degrees Celsius can be, humidity is generally in about eighty percent, this range of efficiency will be better, it is because of this, the plant will generally use such a filter. |
