German
French
Italian
Portuguese
Japanese
Korrean
Russian
Treatment process and installation steps of air shower room filter
Treatment process and installation steps of air shower room filterAn air shower room filter is an indispensable purification facility in current industrial production. What are the treatment process and installation steps of an air shower room filter? Here is a brief introduction for you:First, the treatment process of air shower room filter When using this equipment, you only need to turn the filter group to a horizontal state and load it into a special loading container so that the polymer in it can be discharged smoothly when it melts. Then use a forklift or similar equipment to put the container containing the filter group into the furnace room and start cleaning at room temperature. The entire cleaning process can be divided into four steps: heating, melting, hydrolysis, and cooling. During this period, the temperature must be controlled. Second, the installation steps of the air shower room filter The installation steps are mainly divided into the following four steps: 1. Install the filter group of the large system; 2. Install the polymer filter group of the large system; 3. Install the filter component of the extruder; 4. Replace the filter system of the device, etc. |
