German
French
Italian
Portuguese
Japanese
Korrean
Russian
Three key safety matters for using air showers
Three key safety matters for using air showersI. Safety matters of the air shower room - electrical safety matters1. Put the product in position before wiring and connecting the power supply to avoid causing personal injury. 2. Please confirm whether the rated voltage and frequency of the product are in line with the parameters of the input power supply, so as not to damage electrical components and cause a fire. 3. Air shower room fan for the three-phase 380v power supply, if connected to the reverse will lead to a decline in wind speed, at this time, just swap any two phases, and you can resume normal work. 4. Air shower room wiring precautions: air shower room design has been improving, before installation must first look at the product manual to confirm the rated voltage, frequency, power parameters, etc. to avoid damage to the air shower room accessories, causing unnecessary damage. II. Air shower room safety matters - operational safety matters 1. Under normal atmospheric conditions, the insulation resistance value between the source and end of the air shower room and the casing or exposed conductive part should be greater than 20M, and the insulation resistance value should be greater than 2M after the humidity test. 2. Double doors interlock immediately after the power is turned on, and only one of the doors can be opened, and two doors cannot be forcibly pulled open at the same time, otherwise the double door interlock system will be damaged. 3. Enter the air shower room, and close the door immediately after the start of the blowing shower; blowing shower is completed, into the door to lock, can only open the door, from the door out, at this time can not be forced to push open into the door, otherwise, it will damage the double door interlocking system. 4. In the process of blowing the shower, press the emergency stop switch, blowing the shower immediately stops, and double doors can be opened. 5. If abnormal work is found, the power supply should be cut off in time and the relevant personnel should be notified for overhaul. 6. Overhaul should first cut off the power supply, and air shower room price to avoid inadvertently starting running, resulting in personal injury. III. Safety matters of the air shower room - basic safety matters 1. Please do not place the air shower room at high-speed dust sources and vibration sources. 2. When cleaning the air shower room, please do not use volatile oils, thinners, corrosive solvents, etc. to rub the box to avoid hurting the paint layer or causing discoloration. 3. The following places are forbidden: low temperature, high temperature, humid, dewy, dusty, and sooty places. 4. The inner wall of the air shower room is made of mirror-bright stainless steel, please do not scratch the panel with your hand or something to affect the beauty. 5. When installing the air shower room, please pay attention to leaving maintenance space for the maintenance of high-efficiency filters and fans. |
