German
French
Italian
Portuguese
Japanese
Korrean
Russian
The working principle of exhaust gas purification equipment
The working principle of exhaust gas purification equipmentDuring the operation of the equipment, the exhaust gas enters the equipment through the air inlet and is firstly filtered to remove the particulate matter, and then enters the adsorption section.After a period of use, the filter media is regenerated and can be used again. About the characteristics of the equipment 1、The direction of airflow in the equipment can be selected from the top in and bottom out, or from the bottom in and top out; 2、The thickness of the adsorption layer can be adjusted according to the content of pollutants in the exhaust gas; 3、When the concentration of the exhaust gas is ≤1000mg/m3, the replacement cycle of the adsorbent is 1-2 years; 4, the adsorbent in the equipment is supplied by the manufacturer, and the replaced adsorbent can be disposed of as ordinary industrial waste, which will not cause secondary pollution. What to look for in the selection and application of equipment 1. The equipment can also be made of steel plastic and glass steel materials; 2. Generally installed indoors or outdoors will not affect the effect of use; 3. This equipment and dry paint mist purifier can be used together, can be used in a special production environment, can also be used alone; 4. need to regularly check the purification effect of the equipment, if found in which the filter media saturation should be regenerated in time. |
