German
French
Italian
Portuguese
Japanese
Korrean
Russian
The different classification roles of dust cleaning equipment commonly used in industry
The different classification roles of dust cleaning equipment commonly used in industryThe main function of the dust purification equipment is to collect the waste generated in industrial production, especially for the effective cleaning and collection of dust or lose pollutants, in addition to filtering and purifying the air is also a very important use.The equipment is very safe to use, does not cause secondary dust hazards, realizes automation in many ways, and saves labor. There are two main cleaning methods for the equipment: pulse back blowing and manual shocking; and the cleaning methods generally have the following three modes. I. Manual cleaning Manual cleaning equipment is currently used more and is also a low-end dust purification equipment commonly used in a mode, but the shortcomings of this method are that, if the cleaning staff is not able to accurately judge the degree of dust accumulation on the surface of the filter bag, filter cartridge, and can not accurately judge the equipment cleaning time, will directly affect the normal work of the equipment, so we must still be careful to choose. II. Timing cleaning The timed cleaning method is the application of low-end purification equipment, relatively simple operation, and can effectively control the equipment inside the pressure difference and resistance to rise, but this is not an economical and effective method. The main reason is that the time set manually cannot completely guarantee the accurate cleaning time of the filter, if the set time interval is too long, it will lead to the resistance of the equipment being too large, and the circulation of air is reduced; if the set time interval is too short, then the resistance of the operation is not very high, the cleaning efficiency is naturally not very good, a long time so then it will affect the life of the filter. III. Constant pressure cleaning For the time being, the method of constant pressure cleaning is a proper one, and it is also the mode that is more used in high-end purification equipment, and it is also economical and effective. If the dust on the equipment accumulates more and more, the resistance will rise, and when the resistance reaches the critical point, the equipment will start to clean automatically. In summary, we can find that the three methods of constant pressure cleaning are economical and effective mode, this cleaning mode can effectively ensure that the filter is cleaned when it needs to be cleaned, to ensure the normal operation of the purification equipment so that the service life of the equipment to achieve long. |
