German
French
Italian
Portuguese
Japanese
Korrean
Russian
The correct use of the air shower room process and instructions
The correct use of the air shower room process and instructionsIn and out of the air shower room by the correct use of norms and processes to ensure the effectiveness of the air shower room to remove dust and do not bring the dust source into the dust-free workshop, in the dust-free room before entering the locker room to wear a good dust-free shoes and clothing cap, and then by the following use of the process of the correct operation of the dust-free room.Open the front door, and personnel into the air shower room. The wind shower room begins to wind shower, with wind speed up to 25 meters / second or more, (at this time the electric lock works, and the front and back doors can not be opened). The wind shower room after 15 seconds of wind shower automatically stops (wind shower time factory settings for 15 seconds, can also be changed by the user in the control panel). When the number of air shower nozzles is not enough, the shower personnel rotate their bodies to ensure that every direction can be blown. The rear door is then opened and the personnel exits. The entry process is complete. The exit process is simpler than the entry process. The back door is opened and the person enters the air shower. On the way out, the shower room does not blow, the front door is opened directly and the person exits the shower room. The exit process ends. After the wind shower room is powered on, only one side of the door can be opened, it is strictly prohibited that both sides of the door are open at the same time. The air shower room is in the state of a wind shower, it is strictly prohibited to open the door (until the wind shower stops). If the person in and out of the door forcibly opens the front and back doors, it is easy to cause damage to the equipment. |
