German
French
Italian
Portuguese
Japanese
Korrean
Russian
Specific steps for the use of transfer windows
Specific steps for the use of transfer windowsFor the use of transfer windows, many people may not understand very well, take the specific use of steps, I believe that troubled a lot of people. To solve everyone's doubts, we will explain in detail how to use it.We need to know that the transfer window according to the higher level of cleanliness connected to the clean zone to manage, such as the spray code room and filling room connected to the transfer window should be filled according to the requirements of the management of the room. After work the clean area operator is responsible for the transfer window of the internal surfaces wiping clean, and turning on the ultraviolet sterilizing lamp for 30 minutes. The specific operation steps are as follows: 1、Materials in and out of the clean area must be strictly separated from the human flow channel, and enter and exit through the special channel for materials in the production workshop. 2, materials into the original and auxiliary materials by the preparation class process leader to organize personnel to take off the package or the appearance of clean processing, through the transfer window sent to the workshop original auxiliary materials staging room; within the package of materials outside the staging room after removing the outer packaging, through the transfer window into the package room. Use the steps of the workshop generalist and the preparation, the person in charge of the internal packaging process for the handover of materials. 3, through the transfer window transfer, must strictly implement the transfer window inside and outside the door "one open and one closed" provisions, the two doors can not be opened at the same time. Open the outer door to put the material into the first closet, and then open the inner door to take out the material, and so on. 4. When sending out the materials in the clean area, the materials should be transported to the relevant material intermediate station first and then moved out of the clean area according to the opposite procedure when the materials enter. 5、All semi-finished products from the clean area should be sent to the outer temporary storage room through the transfer window and then transferred to the outer packaging room through the logistics channel. 6、Materials and wastes that are very easy to cause pollution should be transported to the non-clean area from its special transfer window. 7, materials in and out of the end, should be cleaned up promptly at the site of the clean pack room or intermediate station and transfer window health, close the transfer window inside and outside the channel door, and do a good job of cleaning and disinfection. Therefore, if we want to master the use of transfer windows, we need to have an in-depth understanding of the step-by-step process, so that we can better use it. |
