German
French
Italian
Portuguese
Japanese
Korrean
Russian
Safety precautions when using a transfer window
Safety precautions when using a transfer windowSafety precautions when using a transfer window are as follows:1. Basic safety precautions The transfer window is for indoor use, please do not use it outdoors. Please select a top plate and wall structure that can bear the weight of the transfer window, and the installation site must be flat. The transfer window must not be installed in a tilted state, otherwise it will cause failures such as deformation of the box. The transfer window is prohibited from being used in harsh environments such as low temperature, high temperature, high humidity, condensation, dust, oil mist, and chemical corrosion. The transfer window is not explosion-proof and is strictly prohibited from being used in flammable and explosive environments. The transfer window is prohibited from being rinsed with water to avoid damaging electrical components or causing personal injury. It is strictly prohibited to violently vibrate and impact the transfer window, and foreign objects are strictly prohibited from entering the equipment port to prevent short circuits. 2. Electrical safety precautions The transfer window must be fixed in place first, and then a professional person must perform the wiring and power-on operation. Before starting the machine, please confirm whether the rated voltage and frequency of the transfer window are consistent with the parameters of the input power supply to avoid damage to electrical components or even fire. The transfer window must be reliably grounded to ensure safe use. Please correctly and reliably connect the required power cord to the power junction box, and pay attention to the power phase. Users are strictly prohibited from modifying the electrical circuit of the transfer window without authorization. Please do not place heavy objects on the power lead or clamp the power lead to avoid fire or electric shock caused by damage to the power lead. When it is not used for a long time, please cut off the power supply. 3. Operation safety matters It is prohibited to repeatedly operate various switches of the transfer window within one minute to avoid damage to the control device due to frequent actions. When using the operation panel buttons of the transfer window, the action should be gentle to prevent damage to the operation panel buttons. It is prohibited to place objects close to the air inlet of the transfer window to avoid affecting the air intake. When an abnormal situation occurs during the use of the transfer window, it should be stopped and the power should be cut off first, and then a professional should be notified for maintenance. When it is necessary to replace the lighting and sterilization lamps, please cut off the power first and replace them after the lamps cool down. The maintenance channel and the air supply channel are designed as one body, both inside the box. The operator can replace the high-efficiency air filter through this channel, and can also repair the fan. Note: The fan must be repaired only when it is confirmed that it is not in working condition. |
