German
French
Italian
Portuguese
Japanese
Korrean
Russian
Routine maintenance of blast shower
Routine maintenance of blast showerRegular cleaningRegular cleaning is an essential link to ensure that the explosion-proof shower room is always in good working condition. It is recommended that the interior and exterior of the air shower be thoroughly cleaned at least once a week. When cleaning the interior, use a soft, damp cloth to gently wipe the box, nozzle, and floor to remove surface dust and dirt. Small cleaning tools such as a brush can be used to clean some nooks and crannies that are difficult to clean. When cleaning the outside, care should also be taken to avoid using sharp or hard cleaning tools to avoid scratching the protective coating on the surface of the box. If there is oil or other stains on the surface, you can use a mild cleaner to wipe, but make sure that the cleaner will not cause corrosion to the material of the box. After cleaning, dry the water with a clean dry cloth to prevent rust or other damage caused by residual water. Component inspection and replacement In addition to regular cleaning, regular inspection of key components of the explosion-proof air shower and timely replacement of wearing parts are also an important part of maintenance work. As the core component of an air shower, the filter has a direct effect on the purification capacity of an air shower. It is recommended to check the primary effect filter every 1-3 months according to the actual use. If it is found that the filter surface is dusty, it should be cleaned or replaced in time. In general, the primary filter needs to be replaced every 3-6 months. The replacement cycle of high-efficiency filters is relatively long, usually 6-12 months, but it is also necessary to check its filtration effect regularly. When it is found that the blowing speed is significantly reduced, or the purified air is found to not meet the specified cleanliness standards through a professional dust particle counter detection, it should be considered to replace the high-efficiency filter. The fan is also one of the important components of the air shower, and its normal operation is directly related to the blowing effect of the air shower. Regularly check the operating status of the fan, listen to whether its operating sound is normal, and whether there is no abnormal vibration or noise. At the same time, check whether the belt of the fan is loose, and adjust or replace it in time if it is loose. In addition, for other parts of the air shower room, such as explosion-proof lamps, control switches, sealing strips, etc., it is also necessary to check regularly and find that damaged or aging parts should be replaced in time to ensure the overall performance and safety of the air shower room. Through regular component inspection and timely replacement, the service life of the explosion-proof air shower can be effectively extended to ensure that it is always in good working condition. |
