German
French
Italian
Portuguese
Japanese
Korrean
Russian
Precautions for the safe use of air showers
Precautions for the safe use of air showersThe working principle of the air shower room is very simple, but usually, a lot of things need to be paid attention to, the following is the author for you to collate some safety matters.I. Electrical safety matters 1. First put the product in place before wiring, connecting the power supply operation, so as not to cause personal injury. 2. Please confirm that the rated voltage and frequency of this product are consistent with the parameters of the input power supply, so as not to damage the electrical components and cause fire. 3. The air shower room fan is a three-phase 380v power supply, if the connection is reversed, it will lead to a decrease in wind speed, at this time, you only need to switch any two phases, and you can return to normal operation. II. Operation safety matters 1. Under normal atmospheric conditions, the insulation resistance value between the source and end of the air shower room and the shell or exposed conductive part should be more than 20M, and the insulation resistance value after the humidity test should be more than 2 M. 2. The double doors will interlock immediately after the power is turned on, and only one of the doors can be opened, and the two doors cannot be forced open at the same time, otherwise the double door interlocking system will be damaged. 3. After entering the air shower room and closing the entrance door, the blowing shower will start immediately; after the blowing shower is finished, the entrance door will be locked, and you can only open the exit door and walk out from the exit door; at this time, you can't push open the entrance door forcibly, or it will damage the double-door interlocking system. 4. In the process of blowing the shower, press the emergency stop switch, the blowing shower stops immediately, and the double doors can be opened. 5. If the work is found to be abnormal, the power supply should be cut off in time, and notify the relevant personnel for overhauling. 6. Maintenance should first cut off the power supply, and the price of the air shower room to avoid inadvertently starting the operation, resulting in personal injury. III. Basic safety matters 1. Please do not to the high-speed dust source and vibration source. 2. Please do not use volatile oils, thinner, corrosive solvents, etc. to test the box, so as not to hurt the paint layer or cause discoloration. 3. Prohibit the use of the following places: low temperature, high temperature, humidity, condensation, dust and fumes, and mist places. 4. The inner wall of the air shower room is made of mirror stainless steel, please do not scratch the panel with your hand or something, which will affect the beauty. |
