German
French
Italian
Portuguese
Japanese
Korrean
Russian
Pay attention to the appearance structure and design points of air equipment
Pay attention to the appearance structure and design points of air equipmentIn all aspects of our lives, air purification equipment can play a very good role, especially in industrial production. A good Shanghai purification equipment can not only ensure the quality of the product but is also very good for other equipment in the production system. For protection, let’s take a look at the appearance, structure, and design points of air equipment now.The appearance of the air equipment should be similar to the appearance of the pressure-reducing valve, because the appearance design is very important, and it is directly related to whether it can highlight its products among many manufacturers and open sales channels. Therefore, appearance design accounts for about 40% of the working time. The body of the equipment is also the basis of the entire production because it is the main load-bearing part and determines the appearance and flow performance of the equipment to a large extent. Therefore, the material of the body is generally die-cast aluminum alloy or zinc alloy. Try not to use Plastic material, although it is very cheap, is far from strong enough. To summarize some of the above points, the principles usually adopted in the appearance design of air equipment are: on the premise of ensuring that the internal structure is not affected, the appearance must be distinctive, simple, and practical, and the size must be appropriate to facilitate disassembly and assembly. Combination, especially how to connect with other components. Among the products we commonly use now, there are two main connection methods. One is that there is a bevel on the body that is fixed by tightening the bevel on the fixing piece; the other is that it is connected by bolts. The former is easy to disassemble and repair, while the latter is more compact. The appearance structure design of air equipment is mainly based on the design of the flow channel because the flow channel is an important factor affecting the flow rate. What aspects should be paid attention to in the design of the flow channel? 1. Expand the area of the flow channel as much as possible and ensure that its area is 2-3 times the design diameter area; 2. The design of the flow channel should be as short as possible. On the premise of meeting the operating intensity, move the deflector as close to the air inlet as possible. In addition, the baffle in the air equipment is also a key component that affects the water separation efficiency, so we also need to pay attention to its design: 1. The angle of the deflector should be appropriate. If the angle is too large, the airflow will become insignificant and the water separation effect will naturally be poor. If the angle is too small, the separated water will run upward, which is very difficult. Difficult to flow to the bottom. Therefore, the general angle is 30°--45°. 2. The design of the blades must have sufficient strength while retaining sufficient area. 3. The installation of the deflector must be strong because the airflow will produce a relatively large reaction force when passing through, which may easily lead to its loosening or failure. The above is what we have introduced to you about the appearance structure and design points of air purification equipment, including several key aspects, such as the design of flow channels and the design of deflectors, which are relatively important components of the equipment. It will have a relatively large impact on the operation of the equipment. |
