German
French
Italian
Portuguese
Japanese
Korrean
Russian
Key points to note when maintaining high-efficiency air outlets
Key points to note when maintaining high-efficiency air outletsAs we all know, in many industrial fields, the use of various air purification filters is widespread, and the maintenance of some of the components is also essential. Today, we will take the maintenance method of high-efficiency air outlets of air purification equipment as an example to examine the key points.1. Use professional instruments to regularly test the various technical indicators of the equipment. If it is found that it does not meet the original technical parameters, find out the reasons and deal with them in time; 2. According to the actual use of the equipment, regularly take out the filter material for cleaning; 3. If the wind speed decreases during operation, first check whether the surface of the primary equipment is black. If there is this problem, it means that there is a lot of dust in the pre-filter, so the resistance increases. The solution is to remove the filter screen inside the primary equipment in time for cleaning or replacement; 4. After cleaning the filter screen, if the equipment still cannot increase the wind speed, it means that the high-efficiency equipment has also been blocked. The same method is used to replace the high-efficiency equipment. Replace; 5. When replacing high-efficiency equipment, the spray ball plate must be removed, and then the equipment must be taken out. New high-efficiency equipment should be selected according to the original specifications and models. In addition, before installation, the arrow mark on the equipment should be confirmed to point to the direction of the airflow; 6. After the equipment is replaced and installed, it is necessary to promptly confirm whether there is any leakage in the frame, and use a special dust particle counter for detection. It can only be used after the test results meet the technical indicators; 7. Regularly check the electrical circuits in the equipment. If a fault is found, it can be repaired according to the relevant electrical schematic diagram; 8. Regularly maintain each component in the equipment to avoid unnecessary failures; 9. The operating temperature of the entire equipment should not exceed 50℃, and it is strictly forbidden to use it in an environment with open flames. The above nine aspects are the precautions for the use and maintenance of high-efficiency air outlets of air purification equipment that we are going to talk about today. These are all things that need to be fully understood before using a device, which is very beneficial to the overall use of the equipment. |
