German
French
Italian
Portuguese
Japanese
Korrean
Russian
Key points to note when maintaining air purification equipment
Key points to note when maintaining air purification equipmentAny high-tech equipment will face some efficiency decline problems after being used for some time. At this time, we need to carry out proper care and maintenance. Today we will mainly introduce to you the maintenance points of purified air filters, and Let's see it together!After the air purification equipment has been used for a long time, various problems will always occur. The main manifestation is the decrease in filtration efficiency. When the environmental conditions are relatively poor, the replacement cycle will be shortened. When the maintenance indicator in the equipment sends a "repair required" signal, the equipment needs to be maintained and replaced in time. Necessary maintenance is also one of the keys to extending the service life of the equipment. Although the current equipment itself has the effect of intercepting destructive impurity particles, if the air system is not properly maintained, impurities can still enter the engine with the air. Let’s take a look at some key points that need to be paid attention to when maintaining air equipment: 1. Make sure the ignition in the device is turned off; 2. Wipe off the adhered dust on the device casing; 3. Wipe the sealing area between the shell and the gasket with a clean rag, paying attention to wiping from the inside out; 4. If possible, leave the inner filter element in place and check whether there is dust on it; 5. The external air filter element needs to be replaced 3-5 times a day, and then the inner filter element should be replaced once; 6. Check whether the new equipment is damaged; 7. Check the shell cover gasket of the equipment and replace it in time if necessary; 8. Check all hoses, clamps, and connectors in the equipment. In addition to remembering these points, you should not forget some taboos in maintenance: 1. You cannot rely solely on visual inspection to determine whether the equipment is clogged. If the filter is disassembled more frequently, there will be more opportunities for impurities to fall off and enter the air inlet. Therefore, we use air flow restriction during maintenance and repair. The watch is a good way to determine whether the equipment needs to be replaced. Never rely solely on visual inspection. 2. Never wipe the air inlet of the engine from outside to inside to avoid damaging the equipment. 3. Do not use damaged filters or filters that do not match exactly. The above is a brief introduction to the maintenance points and some taboos of air purification equipment. From this, we can learn in detail some issues that need to be paid attention to when using this equipment, so that everyone can use it better. |
