German
French
Italian
Portuguese
Japanese
Korrean
Russian
Key points of daily maintenance of the fine-tuning air supply outlet
Key points of daily maintenance of the fine-tuning air supply outlet(1) Cleaning operationCleaning is the basic work of maintaining the air supply outlet, just like we have to wash our face every day to keep it clean, the air supply outlet also needs to be cleaned regularly to maintain good working condition. If it is not clean for a long time, dust and dirt will accumulate in the air supply port, not only affecting the appearance but also reducing the performance of the air supply port, so that the quality of the air sent is greatly reduced. When cleaning, we need to prepare some handy tools, such as soft special rags, which can easily wipe off the dust and stains on the surface, and will not scratch the air outlet; There are brushes, especially those with thin, soft bristles, which can go deep into the gaps and corners of the air supply outlet to clean up the dust hidden inside. Cleaning steps also pay attention to oh! First of all, carefully remove some parts of the air supply port, such as panels, grilles, etc., in the disassembly process must pay attention to the strength to avoid damaging the parts. After removal, gently brush with a brush to remove the surface of the dust, for some stubborn stains, you can use a wet cloth dipped in the right amount of neutral cleaning agent to wipe, but be careful that the cleaning agent is not too strong, so as not to corrosion the air outlet. After wiping, rinse with water, and then dry with a clean cloth. For the inside of the air supply outlet, you can use a vacuum cleaner to suck the dust or use a brush to gently clean. Finally, install the clean parts back as is, and ensure that the parts are firmly installed and not loose. (2) Filter replacement tips The filter screen is like the "small guard" of the air supply outlet, which can filter out dust, impurities, bacteria, and other pollutants in the air to ensure that the air into the room is clean and fresh. If the filter screen is not replaced for a long time and is blocked, it will affect the ventilation effect of the air supply port, resulting in indoor air not circulating, and may also increase the work burden of the air supply port and shorten the service life. Then, how do you determine whether the filter needs to be replaced? A simple way is to observe the color of the filter. If the filter becomes very black, it indicates that it has accumulated a lot of dust and dirt and needs to be replaced in time. In addition, you can also feel the ventilation effect of the air supply outlet. If the air volume is significantly smaller or the indoor air is not fresh, it may also be that the filter should be changed. The operation of replacing the filter screen is not difficult. First, find the filter location of the air supply outlet, there will generally be a special filter slot or filter frame. Open the fixing device of the filter screen and remove the old filter screen, taking care not to let the dust on the old filter screen drift into the air. Then, install the new filter in the correct direction and position to ensure that the filter is installed tightly and without gaps. After installation, check whether the filter is fixed firmly, and it is done! (3) Component inspection is indispensable In addition to cleaning and replacing the filter, it is also very important to check the various components of the air supply outlet regularly. There are many parts to check, such as the air volume regulator, which can adjust the air volume of the air supply port, we have to check whether it can be adjusted normally and whether the range of adjustment meets the requirements; There is also the tuyere frame to see if there is damage and deformation, if the frame is deformed, it may lead to the installation of the air supply port is not firm, affecting the safety of use. In the inspection, carefully observe the appearance of the parts to see if there are cracks, damage, rust, and other problems. For some movable parts, such as adjusting blades, check whether they can rotate flexibly and whether there is a phenomenon of stalling. If there is a problem with the component, repair or replace it in time. For example, if the air volume regulator is damaged and the air volume cannot be adjusted normally, it is necessary to find a professional for maintenance, or replace the new air volume regulator; If the tuyere frame is slightly deformed, it can be tried to repair, if the deformation is serious, it must be replaced with a new frame. Maintenance frequency is cleverly arranged. Maintenance frequency is a key issue, the arrangement is not reasonable, and the air supply is either "tired" or "idle sick." Different use of the environment, the maintenance frequency of the air outlet is not the same, the following will give you a detailed talk. First of all, our warm small home, the family environment is relatively clean, personnel activities are not as frequent as public places, and the air supply outlet is less polluted. In general, a simple cleaning is carried out every 1-2 months to check the appearance of any obvious dust accumulation and the filter can be replaced once every 3-6 months. However, if someone in the family is allergic to dust, or has a pet, it is necessary to appropriately increase the frequency of cleaning and replacing the filter, after all, the health of the family is the most important! Look at the busy office, where people are dense, there are a large number of people entering and leaving every day, and there are many office equipment, which will produce all kinds of dust and pollutants. As a result, the office's downtuning air outlet requires more frequent maintenance. It is recommended to clean the surface once a week to remove dust and stains and keep the air supply outlet clean and beautiful. The filter screen is replaced once every 1-3 months, to ensure good air quality in the room and allow everyone to work efficiently in a comfortable environment. As for industrial sites, the situation is more complicated! The industrial production process will produce a lot of dust, oil, chemicals, and other pollutants, which will cause serious damage to the air supply outlet. For example, in a cement factory, the air is filled with a lot of dust; In chemical plants, there may be corrosive gases. Therefore, the maintenance cycle of the air supply outlet in industrial places should be greatly shortened. A comprehensive cleaning is usually carried out at least once a week, including cleaning and inspection of internal components. The replacement frequency of the filter may be shortened to weekly or even daily depending on the specific level of pollution. Only in this way can we ensure the normal operation of the air supply outlet in the harsh environment and ensure the smooth progress of production. |
