Installation method of liquid tank high-efficiency filter

Before installing the liquid tank high-efficiency filter, you need to prepare the required materials and tools. It is usually necessary to prepare the liquid tank high-efficiency filter itself, connecting pipes, and tools such as screwdrivers and wrenches.

1. Determine the installation location

First, you need to determine the installation location of the high-efficiency filter based on the room size and usage. Generally speaking, you should choose a location that is close to the human activity area, has good ventilation conditions, and is not easily blocked for installation. In addition, the sealing performance of the equipment must be taken into consideration, so that outside air cannot directly enter the inside of the equipment and affect its normal operation. At the same time, the installation location can also be appropriately expanded, such as installing multiple high-efficiency filters in different corners of the room to improve the air purification effect.

2. Install a pretreatment device

The liquid tank-type high-efficiency filter needs to be matched with a pretreatment device to exert its effect. The pretreatment device generally includes a primary filter and a medium-efficiency filter, which are used to filter out large particles of dust and impurities and reduce the burden on the high-efficiency filter. Before installing the high-efficiency filter, you need to connect the pre-treatment device to the air inlet of the high-efficiency filter. To better achieve the filtration effect, you can consider adding more types of filters, such as activated carbon filters, to further improve the air purification effect.

3. Connect the pipes

The high-efficiency filter needs to be connected to the outside through pipes to achieve air circulation. During installation, appropriate pipe materials and specifications should be selected, and cut and connected as needed. To ensure the tightness of the pipe, sealing gaskets or glue can be added to the joints. In addition, during the process of connecting pipelines, valves, and other equipment can be added to facilitate the adjustment of the speed and flow of air circulation.

4. Install the liquid tank filter

The liquid tank is the core component of the liquid tank high-efficiency filter and requires special attention during installation. First, the liquid tank needs to be placed in a predetermined position to ensure that it is tightly connected to the pipe. Then, install a high-efficiency filter at the air inlet of the liquid tank to ensure the air filtration effect. Then, an appropriate amount of liquid (such as water or oil) needs to be filled into the liquid tank so that the liquid tank can filter and purify. After the liquid tank is installed, it is necessary to check whether its sealing is good and conduct a trial run to ensure that the equipment is working properly. In addition, equipment such as liquid level sensors can be added to monitor the level of liquid in the liquid tank and timely replenishment and replacement.

5. Debugging and maintenance

After the high-efficiency filter is installed, debugging and maintenance are required. During the debugging process, it is necessary to check the pipeline connection, liquid tank sealing, and filtration effect, and make necessary adjustments to the equipment. In terms of maintenance, it is necessary to regularly replace filters, clean liquid tanks, and check pipeline connections to ensure the normal operation of the equipment. In addition, automated monitoring equipment can also be added to achieve real-time monitoring and fault alarm of the operating status of the high-efficiency filter, thereby improving equipment reliability and maintenance efficiency.

The installation process of the liquid tank type high-efficiency filter described above includes multiple steps such as determining the installation location, installing the pretreatment device, connecting pipes, installing the liquid tank, and debugging and maintenance. Only by following the correct installation method can the equipment work properly and achieve the best filtration and purification effect. Zhongjing Purification specializes in the production of liquid tank-type high-efficiency filters. Its box body and liquid tank knife edge have a compact structure and higher sealing reliability. At the same time, it is also equipped with a PAO test port to verify the reliability of the installation after replacing the filter. In addition, we also provide optional side and top pipe styles with different air volumes to meet different installation requirements on site. They are widely used in hospitals, laboratories, biopharmaceuticals, semiconductors, precision machinery, optics, and other technical fields.