News

Installation and use characteristics of close pleated v-filter

A densely pleated v-filter is used in air-conditioning systems that require high cleanliness and can be installed in central air-conditioning to protect the clean room at the end of the ultra-high-efficiency filters, or installed in the pipeline for special cleanliness requirements of the process air supply system, which plays a very important role in use.

Air through the densely pleated v-filter, dust concentration is very low, to avoid air leakage due to the air conditioning system and contamination has been filtered clean air, v-filter should be installed in the air conditioning system of the positive pressure section, under normal circumstances, should be installed in the central air conditioning unit at the very end; high-efficiency filters stained with water may make the efficiency of the filter is unstable, so the v-type high-efficiency filters should be avoided humidifiers and table coolers and other humidity-generating equipment, and It is recommended to install a waterproof plate after these devices.

The pleated v-filter, also known as the W-filter, is a box-type, high-efficiency, high-load HEPA filter. It uses a spacer less design with glass fiber filter paper. The sturdy structure ensures good performance under turbulent flow, the product features can be divided into the following points:

1. V-shape design, no partition design: increased filtration area, low-pressure loss, lower energy consumption, lower operating costs;

2. Lightweight, large air volume, compact structure, suitable for variable air volume or turbulent air velocity system.

3. The outer width is made of ABS plastic frame, aluminum frame, and galvanized frame, of which the plastic frame made of ABS will not produce toxic gas when doing waste gas treatment or burning;

4. Installation flange frame, can be interchanged with the commonly used bag type;

5. For particles by 0.3-micron particles of dust filtration efficiency can reach 99 99%.