German
French
Italian
Portuguese
Japanese
Korrean
Russian
How to maintain an air shower room
How to maintain an air shower roomAn air shower room is a device used to purify and remove dust before people or goods enter the clean area. Regular maintenance is essential to ensure its normal operation and maintain the clean effect. Here are some key points for air shower room maintenance:1. Cleaning - Regularly clean the interior of the air shower room, including the four walls, ceiling, floor, and shower nozzle. Wipe with a clean damp cloth to remove dust and dirt. - For stubborn stains, you can use a mild detergent, but avoid using corrosive or abrasive chemicals. 2. Filter replacement - Pre-filters and high-efficiency filters must be replaced regularly to ensure the filtering effect. The replacement frequency depends on the use environment and frequency of use. Generally speaking, pre-filters are replaced every 1-3 months, and high-efficiency filters are replaced every 6-12 months. - When replacing the filter, make sure that the specifications and models of the new filter are the same as the original filter, and install it according to the correct installation method. 3. Fan inspection - Regularly check the operation of the fan, including whether the motor is running normally, and whether there is abnormal noise and vibration. - Clean the impeller and housing of the fan to ensure the fan has a good ventilation effect. 4. Electrical system inspection - Check the electrical control system of the air shower room, including the control panel, sensors, relays, etc., to ensure that it works properly. - Check whether the wires and plugs are worn, loose, or aged, and repair or replace them in time. 5. Door seal inspection - Check the sealing performance of the air shower door to ensure that it can effectively block the entry of outside air when the door is closed. - If the sealing strip is aged or damaged, it should be replaced in time. 6. Test operation - Regularly test the air shower room to check whether parameters such as wind speed, shower time, and pressure difference meet the set requirements. - If abnormal parameters are found, the cause should be found in time and adjusted or repaired. For example, in the clean workshop of an electronics factory, the maintenance personnel of the air shower room replace the primary filter every two months, and the high-efficiency filter every year, and clean and inspect the air shower room every week, thereby ensuring the long-term stable operation of the air shower room and effectively controlling the number of dust particles in the clean room. In short, regular and standardized maintenance can extend the service life of the air shower room, improve its performance, and ensure that the air quality in the clean area meets the requirements. |
