German
French
Italian
Portuguese
Japanese
Korrean
Russian
How should I solve problems with air showers?
How should I solve problems with air showers?I. Workflow of the air shower room1. After entering the door, open the outer door, and the inner door on the electric lock, after entering the air shower room and then closing the outer door, then there will be voice prompts, through infrared induction to start blowing the shower. 2. After the blowing shower is completed, there is also a corresponding voice prompt, then it is to enter the clean area, at this time the inner door will automatically unlock. 3. Here we should note that after opening the outer door, the electric lock of the inner door will be automatically locked to prevent polluted air from entering the clean area. 4. When the air shower room is working, the internal lighting will light up, indicating that the air shower room is running. II. Troubleshooting methods of the air shower room 1. First of all, check whether the power switch of the air shower room facilities is normally open, if it is open but the equipment still does not work, then start to check the circuit. 2. Check whether the FUSE fuse on the IC circuit board is broken, if so, replace the fuse in time. 3. Check whether the micro switch has action, if not, it should be replaced in time. 4. Check whether the equipment in the AC contactor is normal, if it does not work then it will also affect the normal conduct of the blowing shower. 5. Afterwards, check whether the circuit board can output signals normally. |
