German
French
Italian
Portuguese
Japanese
Korrean
Russian
How long is the maintenance cycle of the double shower room automatic door system?
How long is the maintenance cycle of the double shower room automatic door system?There is no fixed standard for the maintenance cycle of the double shower room automatic door system, which needs to be comprehensively determined according to the frequency of use, environmental conditions, and other factors. The following are some common maintenance cycles and corresponding maintenance contents:Daily maintenance Daily or after each use: mainly clean the door body and the surrounding area, wipe the door surface with a clean and soft wet cloth, remove dust and stains, and especially clean the debris in the track to prevent it from affecting the operation of the door. At the same time, check the operating status of the door, observe whether the door body is opened and closed smoothly and whether there is an abnormal sound or stuttering phenomenon. Regular maintenance Monthly: The sensor of the automatic door needs to be cleaned and checked to ensure that its surface is free of dust and water vapor to ensure sensitive induction. At the same time, the pulleys, hinges, and other mechanical moving parts of the door body can be lubricated, and appropriate lubricating oil or grease can be used to reduce friction and wear. Also check whether the sealing rubber strip of the door is intact, if there are signs of damage or aging, replace it in time. Quarterly: In addition to the completion of monthly maintenance, it is also necessary to check the motor and reducer of the automatic door to see whether the operating sound is normal, whether there is overheating, and whether the connecting parts are loose. At the same time, check and confirm the parameters of the controller to ensure that its Settings are correct, and the parameters such as the opening and closing speed and time of the door meet the requirements. Every year: A comprehensive inspection and maintenance of the automatic door system is required every year. This includes a thorough cleaning and calibration of the track, and timely repair or replacement if there is distortion or wear. Deep maintenance of key components such as motor and reducer or replacement according to the actual situation. In addition, it is also necessary to carry out functional tests on the entire automatic door system, including the opening and closing of the door, anti-clamp function, double door synchronization, etc., to ensure that its various performance indicators can meet the specified requirements. If the frequency of use of the double-open shower room is higher, or the use of a harsh environment, such as high dust, high humidity, etc., the should be properly shortened maintenance cycle, increase the number of maintenance, to ensure the normal operation and service life of the automatic door system. |
