German
French
Italian
Portuguese
Japanese
Korrean
Russian
Disinfection spray air shower maintenance
Disinfection spray air shower maintenance(A) Cleaning the shell is exquisiteIt is important to clean the outer shell of the air shower regularly. First wipe with a soft dry cloth to remove the daily floating dust, in case of stains, gently wipe with neutral detergent diluent, and then wipe with a wet cloth with water, and finally dry to prevent rust. Like the air shower room of the food factory, often stained with oil, timely cleaning can maintain a clean appearance and extend the service life. (2) Fine maintenance of the spray system The spray system is about disinfection. Check the nozzle regularly to see if there is any blockage, and use a fine needle to clear the holes to ensure uniform spray. At the same time, check whether the pipeline connection is leaking, and clean the pipeline regularly to prevent the precipitation of impurities from affecting the flow of disinfectants. (3) Filter replacement should not be ignored The filter is the air shower "lung", the initial effect filter 1-3 months to clean or replace, depending on the amount of dust in the environment; The high-efficiency filter should be replaced in 6-12 months, and the wind speed is found to be weakened and the cleanliness is not up to standard during use, and the replacement should be checked in time to ensure the filtration effect. (4) Electrical testing to ensure safety Check the electrical wiring every month for damage and aging, and ensure that the plug and socket are firmly connected. When the air shower room is running, pay attention to the running sound and heat of the fan, spray, and other equipment, and stop the maintenance immediately to ensure the safety of use. |
