German
French
Italian
Portuguese
Japanese
Korrean
Russian
Different classification functions of commonly used industrial dust purification equipment
Different classification functions of commonly used industrial dust purification equipmentNowadays, many industrial productions have higher and higher environmental requirements, especially dust pollution, which cannot occur in production. The best way to achieve this goal is to use professional dust purification equipment. Today, let's take a look at the different classification functions of this Shanghai purification equipment!The main function of this equipment is to collect waste generated in industrial production, especially to effectively clean and collect dust or loose pollutants. In addition, filtering and purifying the air is also a very important use. The equipment is very safe to use, will not cause the harm of secondary dust, realizes multi-faceted automation, and saves labor. There are two main cleaning methods for the equipment: pulse backwashing and manual vibration; and the cleaning methods generally have the following three modes: 1. Manual cleaning Manual cleaning equipment is currently more commonly used, and it is also a common mode in low-end dust purification equipment. However, the disadvantage of this method is that if the cleaning staff cannot accurately judge the degree of dust accumulation on the surface of the filter bag and filter cartridge, and cannot accurately judge the cleaning time of the equipment, it will directly affect the normal operation of the equipment, so it is still necessary to choose carefully. 2. Timed cleaning The timed cleaning method is widely used in low-end and mid-range purification equipment. The operation is relatively simple, and it can effectively control the pressure difference and resistance increase inside the equipment, but it is not an economical and effective method. The main reason is that the manually set time cannot fully guarantee the accurate cleaning time of the filter. If the set time interval is too long, the resistance of the equipment will be too large and the air circulation will be reduced; if the set time interval is too short, the running resistance is not very high, and the cleaning efficiency is naturally not very good. If this continues for a long time, it will affect the life of the filter. 3. Constant pressure cleaning For now, the constant pressure cleaning method is the most appropriate one, and it is also the most commonly used mode in mid- and high-end purification equipment, and it is also the most economical and effective. The fundamental purpose of using these devices is to reasonably control and stabilize the pressure difference, and the constant pressure cleaning method is mainly to control the time of cleaning the filter according to the pressure difference of the equipment. If the dust on the equipment accumulates more and more, the resistance will also increase. When this resistance reaches the critical point, the equipment will start to clean automatically. In summary, we can find that among these three methods, constant pressure cleaning is the most economical and effective mode. This cleaning mode can effectively ensure that the filter is cleaned when it needs to be cleaned, ensuring that the purification equipment can operate normally and maximize the service life of the equipment. The above is the classification of different dust purification equipment we introduced to you. The same equipment has three different cleaning modes to choose from. If we consider it comprehensively, we generally prefer the third method - constant pressure cleaning, which is also commonly used in current high-end purification equipment! |
