Detailing the specific installation methods for various types of filtration equipment
Detailing the specific installation methods for various types of filtration equipmentSpecific installation methods for different filtration equipmentI. High-efficiency filters1、Before installation, the plastic packaging of the product must be opened within the clean room; 2、Hold the outer frame of the filter with both hands in the process of handling; 3、At least two people are needed for the installation of larger filters; 4. Do not use your hands to hold the middle part of the filter; 5、Do not touch the material inside the filter; 6. Do not use a knife to cut open the outer packaging of the filter; 7、Be careful not to twist the filter when handling; 8、Protect the gasket of the filter to avoid collision with other objects. II. Box-type hepa filter 1、More often use tie rod installation frame, pay attention to avoid damage to the filter during the installation process; 2. When installing, pull the outer frame by hand and do not touch the internal filter material; 3. The final resistance at the time of installation is recommended to be less than 600Pa. III. Bag type medium efficiency filter 1. When installing the filter, pay attention to the height and width direction of the filter not to be reversed; 2. Avoid contact with the filter material in the equipment when installing, and the filter material should not be used as the stress point for installation; 3, it is recommended to wear gloves to install the filter, because the fixed bracket of the filter bag may hurt your hands. IV. V-type hepa filter 1、Using the method of installing the frame, use the pressure buckle to compress; 2、Sealing must be done between the frames of the equipment; 3、Hold the outer frame of the filter by hand when handling it to avoid contact with the filter media; 4. Pay attention to the position of the outer frame by hand to prevent damage to the filter paper inadvertently. Above we have introduced four specific installation methods for filtration equipment, of which the most important point is to pay attention to the location of the hand-held filter, to avoid contact with the filter media so that the filter media is damaged, only proper installation to ensure the normal use of equipment. |