Common cargo shower room troubleshooting methods

1. The fan is not working properly. Typically, this can be caused by a power failure, a damaged motor, or a loose cable connection. The method is to first check whether the power supply is normal, then check whether the motor is damaged or needs to be replaced, and finally ensure that all cables are firmly connected. Secondly, check whether the emergency switch of the air shower outdoor box is turned off. If it is determined to be cut off, just press it gently with your hand, turn it to the right and release it.

2. The cargo shower door cannot be closed. This could be caused by a damaged or stuck door lock, a loose door sill, or an obstruction. First, check whether the door lock is damaged and needs to be repaired or replaced; then check whether the threshold is loose and whether it can be repaired in time; finally, check whether there are any debris or obstacles around the door and clean them up in time.

3. The filter is clogged. Due to long-term use, dust and dirt on the cargo shower room filter may cause the filter to become clogged and reduce the filtration effect of the air shower room. To solve this problem, we should regularly clean and replace the filter according to the requirements of the purification equipment manufacturer to ensure its normal operation. (The primary filter in the cargo shower room is usually replaced every 1-6 months, and the high-efficiency filter is usually replaced every 6-12 months).

4. The nozzle is faulty. The nozzles may be clogged or damaged and not working properly, resulting in poor cleaning results. The way to solve this problem is to regularly check and clean the nozzles, and replace damaged nozzles in time to ensure they are not clogged.

5. Unable to automatically sense the shower. Please check the light-sensing system of the box in the cargo shower room to see if the light-sensing device is installed correctly. If the two sides of the light sensor are facing each other and the light sensor is normal, the shower can be automatically sensed.

6. Electrical system failure. For example, the light does not light up and the buttons do not respond. This may be caused by a faulty circuit, a shorted wire, or a bad contact. In this case, you should check that the circuits and wires are working properly and repair or replace damaged parts.

In short, cargo shower rooms often encounter some failures during long-term use. But as long as we perform regular maintenance, follow correct operating methods, and pay attention to fault prevention, these common faults can be avoided. For faults that have occurred, timely processing and repair according to the specific situation can ensure the normal operation of the cargo shower room, thereby ensuring the improvement of product quality and production capacity.