German
French
Italian
Portuguese
Japanese
Korrean
Russian
Clogged air shower filters depend on cleanliness or frequency of use
Clogged air shower filters depend on cleanliness or frequency of useThere are many types of air showers on the market. Today I will teach you about the PLC intelligent control method used in the single-person air shower system. The LED display on the control panel can correctly display the operating status of the air shower, the interlocking status of the two doors, the time of the air shower and the delay door opening. It is equipped with a photoelectric sensor and a one-way channel air blower entering from the non-clean area. In the shower room, after the door is closed, the infrared light senses the person taking a shower, and the door is locked after the shower.The air shower mainboard soft key touches the time relay, LED displays and sets the shower time, which can be adjusted in the range of 10-99s. The shower time can be adjusted according to the difference in the external environment of the air shower room; High performance, high sealing, using imported electronic components, stable and reliable operating performance, advanced noise reduction and mute device system, and using EVA sealing material, high sealing performance. Main filter This filter is located after the air nozzle, and its update cycle can be determined by an anemometer to detect the wind speed value or pressure difference measurement to determine whether to replace it. The inspection cycle is approximately 2 to 4 times per year. Pre-filter: The pre-filter is located under the device. Please remove the circulating air return vent to easily pull out the front filter. Clogging of the pre-filter depends on frequency of use and cleanliness. Please observe the clogging time in the early stage of use, and then clean it regularly with compressed air, water washing and vacuum cleaner. Depending on normal usage, cleaning is required 2-3 times a month. Since the internal circulating air return part of the equipment is located under the machine, a lot of contaminants can accumulate in the corners of the floor, so use a vacuum cleaner to clean it several times. Please confirm whether the blower rotation direction is correct. If you find that the fan is spinning in the opposite direction, swap any two phase power wires in the three-phase power supply to ensure that it is spinning in the forward direction. |
