German
French
Italian
Portuguese
Japanese
Korrean
Russian
Clean area high-efficiency filter regular replacement of these steps can not be wrong
Clean area high-efficiency filter regular replacement of these steps can not be wrongNow many industries in the processing of products, for the site of environmental quality requirements, such as the pharmaceutical industry, electronics factories, semiconductor factories, food factories, etc., to ensure that the indoor air is clean while maintaining better quality assurance, can not be separated from the use of the clean room, and now the clean is becoming more and more stringent, so the clean area of high-efficiency filters will be in-depth in all walks of life, plays an important role in the process, and the long-term use, must be regularly replaced to ensure that the workshop air quality, today Changrui manufacturers to explain how to replace the clean area of efficient filters. In long-term use, it must be regularly replaced to ensure the air quality of the workshop, how to replace the clean area high-efficiency filter?First of all, to replace the clean-area high-efficiency filter, we must check the static pressure box, fixed parts, and panels for rust and loss, and if rust is found, we need to remove the rust and spray paint treatment in the replacement. Secondly, we should check whether the outer package of the high-efficiency filter is intact, without any damaged certificates of conformity, the outer frame is strong and sturdy, and the filter paper should be without any damage. Then be careful to take out the outer package, do not touch the filter paper with hard things to avoid damage to the filter paper, and then place it in a clean and dry place for spare parts, at the same time, when replacing part of the filter in the clean area, open the inner packaging of the filter, paste the sealing strip to the air inlet side of the high-efficiency filter, and smoothly put the filter into a static pressure box, pay attention to the handling of the filter, and it's best to record the specification model, number and installation location. It is better to record the specification model, number, and installation position. Finally, when fixing the clean-area high-efficiency filter, first check that the filter is in the middle of the static pressure box, the distance between the filter and the static pressure box is quite close, the fixing parts should be fixed at an angle to prevent uneven force or damage to the filter, and note that the fixing nut in the static pressure box should be tightened so that the connection between the filter and the static pressure box matches and is sealed. |
