German
French
Italian
Portuguese
Japanese
Korrean
Russian
Automatic air shower extends the service life of air shower
Automatic air shower extends the service life of air showerTo keep the automatic air shower in good operating condition and extend its service life, daily maintenance is crucial.Regular cleaning is the basic work. The inside and outside of the air shower room should be wiped regularly, the dust and stains on the surface, keep it clean, especially the key parts such as the nozzle and filter surface, and also focus on cleaning to prevent the accumulation of pollutants affecting the purification effect. For example, you can use a clean wet cloth to wipe the inner wall of the air shower room, the door, the control panel, etc., if there are stubborn stains, you can use a mild detergent, but be careful to avoid using a detergent containing corrosive ingredients, so as not to damage the surface of the equipment. Filter replacement and maintenance cannot be ignored. The primary filter is usually recommended to be replaced every 1-3 months, if the use of dust in the environment, the replacement cycle should be appropriately shortened; The high-efficiency filter is replaced every 1-2 years. When the surface of the primary filter is found to be black, it indicates that its dust capacity is close to saturation, the resistance increases, and the internal filter material should be replaced or cleaned in time. If the wind speed can not return to normal after the replacement of the primary effect filter, the high-efficiency filter may be blocked, and it needs to be replaced in time. When replacing the filter, strictly follow the steps in the equipment manual to ensure that the filter is properly installed and sealed to prevent air leakage. For example, when replacing the high-efficiency filter, it is necessary to remove the spray ball plate, take out the old filter, and then install the new filter in place according to the original specifications, pay attention to the arrow mark on the filter should point to the direction of the airflow, and use the dust particle counter to detect after the installation is completed, and confirm that the technical indicators are reached, the air shower can work normally. Maintenance of the electrical system is also crucial. Regularly check whether the electrical circuit is damaged, aging, loose, etc., if there is a problem, it should be repaired or replaced in time. At the same time, ensure that the electrical components are firmly connected to avoid equipment failure due to poor contact. The software of the control system should also be updated and maintained regularly to ensure its stable operation and normal functions. For example, conduct a comprehensive inspection of the electrical line every month to check whether the outer cover of the line is damaged, or discolored, whether the terminal is loose, and deal with the problem in time; A quarterly software upgrade is performed on the control system to ensure it is compatible with the latest equipment operation requirements. In addition, it is also necessary to pay attention to the use of an air shower environment. Avoid use in high temperature, high humidity, and corrosive gas environments, if it cannot be avoided, should take appropriate protective measures, such as installation of ventilation equipment, and the use of corrosion-resistant materials. At the same time, it is necessary to ensure that the air shower is installed on stable ground to avoid shaking the equipment due to uneven ground, affecting its normal operation and service life. |
