German
French
Italian
Portuguese
Japanese
Korrean
Russian
Air shower room routine maintenance needs to pay attention to what?
Air shower room routine maintenance needs to pay attention to what?Exterior and door maintenanceRegular cleaning: Often use a clean soft cloth to wipe the shell of the air shower, remove dust and stains on the surface, and keep the appearance clean. This not only makes the shower look new but also prevents contaminants such as dust from entering the interior and affecting the performance of the equipment. Door body inspection: Check the sealing rubber strip of the air shower door daily to ensure that it is intact. If the rubber strip is found to be aging or damaged, it should be replaced in time to ensure the tightness of the door and prevent external air from entering the clean area. At the same time, check whether the opening and closing of the door are smooth and, there is no deadlock phenomenon, if there is an anomaly, it is necessary to check the track and hinge of the door, clean the debris in the track or lubricate the hinge. Filtration system maintenance Primary filter: Check the primary filter regularly according to the environment and frequency of use. When there is a lot of dust on the filter surface, remove it for cleaning. Generally speaking, in a cleaner environment, it can be cleaned once every 1-2 months; If the ambient dust is large, it needs to be cleaned monthly or even more frequently. After cleaning, ensure that it is completely dry before putting it back. High-efficiency filter: The replacement cycle of a high-efficiency filter is relatively long, but it is also necessary to check its filtration effect regularly. The cleanliness of the wind can be detected by a professional dust particle counter, and when the test result is not up to standard, the high-efficiency filter should be replaced. Under normal circumstances, the service life of the high-efficiency filter is 1-2 years, and the specific replacement time needs to be determined according to the actual use. Electrical system maintenance Electrical components inspection: Regularly check the electrical components in the air shower room, such as PLC controllers, time relays, photoelectric sensors, etc., to see if there are signs of loosening, burning, or damage. Tighten loose terminals in time. If damaged components are found, replace them in time to ensure the normal operation of the electrical system. Power check: Check whether the power supply of the air shower is stable and whether the voltage is within the range specified by the equipment. An unstable power supply may affect the normal operation of the equipment and even damage electrical components. If the voltage is abnormal, contact professional personnel for troubleshooting and handling. Blower system maintenance Fan maintenance: Check the running status of the fan regularly and listen to whether there is abnormal noise when the fan is running. If there is noise, there may be foreign bodies in the fan or the fan bearing is damaged, and the bearing needs to be cleaned or replaced in time. At the same time, lubricating oil is regularly added to the fan bearing to ensure the smooth operation of the fan and extend its service life. Nozzle inspection: Check whether the nozzle is blocked, if so, you can use a fine needle or special tools to clean the dirt inside the nozzle, to ensure uniform wind, to ensure the effect of blowing. In addition, pay attention to adjusting the Angle of the nozzle so that it can better cover the surface of the human body and improve the efficiency of the blowing. |
