German
French
Italian
Portuguese
Japanese
Korrean
Russian
Air shower care and maintenance methods_Air shower manufacturer
Air shower care and maintenance methods_Air shower manufacturerAir shower is a kind of purification equipment commonly used in clean laboratories, precision instrument production, and other places that require a highly clean environment. It can quickly remove particles attached to the human body or cargo through powerful high-speed airflow to ensure the cleanliness of the work area. However, to maintain the normal operation of the air shower and extend its service life, regular care and maintenance are essential. The following purification equipment manufacturer Zhongjiang Purification introduces the care and maintenance methods of air shower rooms.1. To ensure the normal operation of the air shower room, electricians or inspectors need to conduct regular inspections and maintenance to ensure that all indicators are within the set parameters of the equipment. 2. Filter replacement needs to be determined based on the customer's frequency of use. Generally speaking, primary-efficiency filters need to be replaced every 1-3 months, medium-efficiency filters need to be replaced every 3-6 months, and high-efficiency filters need to be replaced every 6-36 months. The primary and medium-efficiency filters can be cleaned regularly every month. After cleaning, they can be reinstalled after being completely dried. 3. When cleaning the air shower, avoid using sharp objects to scratch or collide with the surface of the air shower. When cleaning, avoid using oxidizing or acid-base liquids to wipe the air shower body. It is best to use industrial cleaners for maintenance. 4. Correct use of the air shower is the key to avoiding illegal operations. Use it correctly according to the air shower operating standards, and do not change the parameters of the air shower at will. In normal working mode, do not force the air shower door to open or close. Before and after the air shower, gently open and close the air shower. Door; when a malfunction occurs, do not activate the manual button, and notify relevant personnel in time to handle it. 5. Regularly inspect the electrical circuits of the air shower. If a fault occurs, refer to the electrical schematic diagram for repairs. When an air shower failure occurs, you should immediately press the emergency stop switch, turn off the power, and promptly notify the air shower manufacturer to send someone to check. 6. If the fan of the air shower room does not work, first check whether the emergency switch of the outdoor box of the air shower has been cut off. If it is confirmed that it has been cut off, press it gently with your hand and turn it to the right to release it. Normally, the wind speed of the air shower should be maintained at 10-30m/s, so it is necessary to regularly check whether the wind speed is normal. 7. Regularly maintain the door of the air shower room to ensure that the electronic lock is aligned with the keyhole to avoid the lock pin from getting stuck. Because during operation, employees may operate illegally, causing the electronic lock pin to become stuck or malfunctioning, or the door closer to be improperly adjusted, affecting the closing effect. 8. The operating temperature of the air shower shall not exceed 50°C, and the use of open flames is strictly prohibited. 9. In addition, you also need to check whether the screws are loose, check the sealing of the air shower room, the operating condition of the fan, and whether there are dust and stains inside and outside the fuselage, and clean them in time. 10. Finally, the opening and closing of the air shower also requires attention to detail. When opening the air shower, make sure the door is closed tightly to prevent outside air from entering and disturbing the clean environment. When closing the air shower, it is necessary to ensure that the internal air is completely discharged to prevent residual particles from contaminating the work area. In short, the care and maintenance of the air shower is the key to ensuring its normal operation and extending its service life. To ensure the safety of employees and the normal operation of equipment, a special maintenance record and reporting system can also be established to regularly evaluate and analyze the maintenance situation to discover and solve potential problems promptly. Through daily maintenance and regular maintenance, the cleanliness and working efficiency of the air shower can be maintained, thereby providing a clean environment for our work and experiments. I hope the above content will be helpful to everyone in the use of air shower room. |
