Advantages and installation matters of modular fast-installation operating room

The modular fast-installation operating room adopts a factory-based production method. Through reusable technology and professional installation services, it can reduce the construction time of the operating room, improve efficiency, reduce costs, optimize resource allocation, and meet the needs of clinical surgery. Different modules can be selected according to actual needs, such as operating table, surgical light, surgical instrument, clean area, purification system, etc. Compared with traditional operating rooms, the advantages of modular fast-installation operating rooms are:

1. First, it can be built quickly. Traditional operating rooms require a long time to build and decorate, while modular fast-install operating rooms can be integrated, assembled, and debugged in factories, greatly reducing installation time and construction cycle;

2. Secondly, it can reduce costs. Traditional operating rooms require large-scale decoration, construction, and debugging, while modular fast-install operating rooms are prefabricated in factories, which can greatly reduce construction costs. In addition, modular fast-install operating rooms can be flexibly configured according to needs to achieve resource sharing and further reduce costs;

3. At the same time, it avoids harm to personnel and pollution to the environment. Modular operating rooms use factory-produced building units and functional units. During the entire assembly process, there is no need for welding, spraying, or cutting. The joints are filled with medical silicone rubber strips, eliminating uncontrollable factors, reducing the complexity of on-site processes, and being green, environmentally friendly, safe, and efficient;

4. Finally, it can improve efficiency. Since modular fast-install operating rooms are prefabricated in factories, the assembly speed is very fast and can be put into use quickly. In addition, the modular assembly can be performed according to the requirements of users during use to maximize resource utilization optimize efficiency, and achieve sustainable development (make up for defects and increase equipment).

The modular quick-install operating room is installed according to the quick-install technology. All materials are divided into independent panels. Each panel is processed into a finished product in the factory, and no external frame is required. Only the finished products need to be assembled on-site, and the construction period will not be affected by cross-construction. Zhongjing Purification specializes in the production of modular quick-install operating rooms using the third-generation quick-install technology. The specific installation matters are as follows:

1. During installation, first assemble the baseline part to build the outline and foundation of the operating room. As shown in the figure, the baseline part is a two-in-one upper and lower buckle installation, and the lower half of the card slot is quickly fixed to the ground with a tension bolt, and the card slot and the main body of the base can be quickly buckled;

2. After installing the base foundation, use the circular plate to install the arc-shaped operating room outline. The arc plate is divided into arc columns, arc beams, and arc inner corners, and the three are connected by bolts. The arc beam can maintain appropriate looseness to facilitate the subsequent installation of wall panels, while the internal three-dimensional arc can ensure that the inner wall of the operating room is smooth, without dead corners and nails;

3. The interior of the wall panel is made of glass magnesium board, polyurethane foam, or magnesium oxysulfide. The finished products all meet the fireproof Class A standard and use a film-coated board or antibacterial coating board surface, which has reliable hardness and fireproof performance. The surrounding wall panels have grooves to buckle with the main body of the anchor, and the arc beams and arc columns also have grooves, which are buckled with the wall and ceiling through the clip strips. At the same time, the wall sealing strips are also inserted in the clip strip grooves to enhance the sealing of the wall;

4. When installing the foundation part of the anchor, the laminar air supply ceiling can be hoisted at the same time. After installing the base plate, arc plate, and front plate, you can install the ceiling;

5. Install the door frame, use the corner card strip to easily install the door opening;

6. After the wall, ceiling, and door frame are installed, you can then install the functional unit equipment such as the indoor instrument cabinet, socket box, return air vent, etc.;

7. Finally, connect the ventilation duct to complete the installation.

In short, the innovation of fast installation technology in the construction of operating rooms and the use of modern assembly technology make the construction of operating rooms more technological and productive, to better serve the medical industry.